MA – Full Recompute All MA Records

CAMA Full Recompute All Mass Appraisal Records

Overview

The Recompute All MA Records control can be added to any Mass Appraisal form, with the exception of CAMA Sales Information.
It is used for recomputing all the Mass Appraisal records for the current parcel. If this functionality is not applied, only the current record is updated when you click the Save button.
If the functionality is applied, then all the land, building, income, and MRA records for the current parcel are updated. For example, if you have a Land record open, and click Recompute All Mass Appraisal, all the land records associated with the property are recomputed. As well, all the building and income records associated wish the property are recomputed.
The Recompute All Mass Appraisal records can be run automatically, when the user clicks Save or Delete, or manually, when the use clicks the Recompute button. In the latter case, as with all OpenForms action button, security can be applied.

An expression can be added to this functionality so that it is applied under a specific condition only.

101-ma-fea-001.pdf

Configuring the Recompute All Mass Appraisal Records Functionality

Adding the Recompute All
To add the Recompute All Mass Appraisal functionality to a Mass Appraisal user form:

  1. Launch the Govern OpenForms Designer (OFD).
  2. Open the CAMA form.
  3. Select the tab for the entity.
  4. Expand the Controller properties. The name of the Controller varies with the form.
  5. Select one of the following from the ComputeExecuteMethodType drop-down list.
    None If you do not want to apply this functionality.
    Manual: To run the recompute when the user clicks the action button.
    AfterSaveAndDelete: To run the recompute when the user clicks the save or delete button for the current record.
  6. Click Save

 

Verifying that the Action Button is Added to the Form

If you have set the Recompute All MA for the Current Parcel functionality to manual mode, you can verify that the action button is added in Govern.
To verify the action button is added to the form:

  1. Launch Govern.
  2. Open a Profile that contains the form you configured.
  3. Open the form.
  4. Ensure that the Recompute All MA for Current Parcel button is visible.
  5. Hover the mouse over the button.
  6. Ensure that the tool tip is displayed.

 

Defining Security for the Recompute All Mass Appraisal Records Functionality

To set up security permissions for the Recompte All functionality:
Launch the Govern OpenForms Designer (OFD).

  1. Open the form to which you added the Recompute All functionality.
  2. Click the Security icon.
  3. Select an item under each of the following: Type, Profile, User or Role
  4. Select the downward arrow beside the action buttons for the entity that you configured.The security setting Recompute All MA for the Current Parcel is displayed.
  5. Click the arrow to disable the security for the selected security Type, Profile, and Role or user.
  6. Click Save on the OpenForms Designer form.

 

Adding a Condition to the Recompute All MA

You can add an expression to the Recompute All MA functionality in order to execute the recompute only when a certain condition is met. For example, you could add an expression to execute the query only when a specific land schedule is selected.
To add a condition:

  1. Launch the Govern OFD.
  2. Open the form to which you added the Recompute All MA functionality.
  3. Click the ellipsis button beside the Execute Condition parameter.This opens the Expression Selector.Enter the expression.In the example, the expression is @attrRATE_SCHEDULE=’Bay Front’
  4. Click OK on the Expression Selector.
  5. Click Save on the OpenForms Designer interface.

 

TIP: You can test the expression with the Evaluate feature. When you add an expression, the attributes in the expression appear on the form. Enter a value in the parameters for the form. Click Evaluate.

 

 

101-ma-fea-001

 

0 votes, average: 0.00 out of 50 votes, average: 0.00 out of 50 votes, average: 0.00 out of 50 votes, average: 0.00 out of 50 votes, average: 0.00 out of 5 (0 votes, average: 0.00 out of 5)
You need to be a registered member to rate this.Loading...

 

Name & Address Group Security Rules Grid

Name & Address Group Security Rules Grid

Overview

In addition to creating a Name Sharing Group, you can further refine name and address maintenance by setting access permissions for each user.

Security for the Name & Address Maintenance function is more complex than for the other functions due to the important and sensitive nature of the data.
There are four levels of user access that can be set for each Govern function that typically provide the following rights:

  • Inquiry Only: The user is only able to view the data for the specified function.
  • Create and Modify: The user can view, create and modify data for the specified function.
  • Create, Modify, Delete: The user can view, create, modify and delete data for the specified function.
  • Full Access Rights: The user can view, create, modify and delete data and could also modify and delete historical data for the specified function.
NOTE: Super Users are automatically given Full Access Rights to all functions.

Read More...

 

In order to grant the permission to create names to any user, including a Super User or a user with Full Access Rights to the Name & Address Maintenance function, must be specified in the Security Manager (SM).

Name & Address Security Grid

103-SY-003-GNA60-(NA SecurityGrid_01).png

The two (2) grids below should serve as a guide to the users level of access when they are Within a Department in a group, or Outside of the Name Group. For example in the Name & Address form, a user that is in the Building Department, and is a member of the Create/Modify/Delete group, within their department, for Names that are designated as Private, will be able to Search for the name, Link to the name, Modify Addresses, and Delete Names.
Although note that according to the system rule, this user is not able to Modify (A) the name. Outside of their name group they have no access (B). Refer to the grids below for details.

103-SY-003-GNA60-(NA SecurityGrid_02).png

The following grid should serve as a guide to system imposed user restrictions for Name Sharing groups.

103-SY-003-GNA60-(NA SecurityGrid_03).png

103-SY-003-GNA60-(NA SecurityGrid_04).png

Name & Address Maintenance Security

In addition to creating a Name Sharing Group, you can further refine name and address maintenance by setting access permissions for each user.
Security for the Name & Address Maintenance function is more complex than for the other functions due to the important and sensitive nature of the data.
There are four levels of user access that can be set for each Govern function that typically provide the following rights:

  • Inquiry Only: The user is only able to view the data for the specified function.
  • Create and Modify: The user can view, create and modify data for the specified function.
  • Create, Modify, Delete: The user can view, create, modify and delete data for the specified function.
  • Full Access Rights: The user can view, create, modify and delete data and could also modify and delete historical data for the specified function.

However, in order to grant the permission to create names to any user, including a Super User or a user with Full Access Rights to the Name & Address Maintenance function, the Allow Creation of Names option must be selected on the User Maintenance form in Govern Admin.

The following tables display the different levels of access security for the Name & Address Maintenance function, according to the following tasks:

  • Search: the right to search for a name and address record through the various search screens; for example the Name Search or the Name & Address Search. Refer to the Property Control guide for further details.
  • Link: the right to link a name and address record to another function; for example, a Permit function, the Owner Information, Occupant / Business, Related Lien Names, ACH Information by Name or the Real Estate or

Utility Billing Mailing Index, provided the user has access rights to these functions.

  • Create: the right to create a new name and address record.
  • Modify Name: the right to change name data: i.e., first name, last name, company name or formatted line_1.
  • Modify Address: the right to change the address part of the record.
  • Delete Name and Address: the right to delete name and address records.

The following conventions are used in these tables:
103-SY-003-GNA60-(NA SecurityGrid_RestrctnLvl01-SymblDef).png

Private Names

103-SY-003-GNA60-(NA SecurityGrid_RestrctnLvl02-PrivtNms).png

 

  • The permission to create names is granted if the Allow Creation of Names option is selected on the User Maintenance form, in Govern Admin. Users can then create names within their primary department and within the Name Sharing Group, selected for the department. Otherwise, users do not have permission to create names, regardless of their department, regardless of the Name Sharing Group in which the department is a member and regardless of User Access Type.

Restricted Names & Addresses

103-SY-003-GNA60-(NA SecurityGrid_RestrctnLvl03-RestrctdNA).png

 

Restricted Names

103-SY-003-GNA60-(NA SecurityGrid_RestrctnLvl04-RestrctdNms).png

No Restrictions

103-SY-003-GNA60-(NA SecurityGrid_RestrctnLvl05-NoRestrctns).png

Summary

  1. Only users with Full Access Rights on the Name and Address Maintenance function can modify a name even within their Name Sharing Group.
  2. Even with Full Access Rights, users can modify a name, outside of their Name Sharing Group, only if the No Restrictions option is selected on the Department Setup form.
  3. Users with Full Access Rights, Create, Modify, Delete or Create, Modify rights can always modify an address within their name sharing group.
  4. These users can modify an address created outside their Name Sharing Group only if the Restricted Name or No Restrictions option is selected on the Department Setup form.
  5. Users with Full Access or Create, Modify, Delete rights can delete name and address records even though they may not be granted permission to create or modify them.
  6. All users can view and search for a name and address records unless Private names is set for the department and the department is outside their Name Sharing Group.
  7. Users can create names if the Allow Creation of Names option is selected on the User Maintenance form, regardless of whether or not the user’s department is a member of the Name Sharing Group and regardless of the user ‘s Access Type.

If this option is selected users can create names within their primary department and within the Name Sharing Group, selected for the department.

 

 

103-SY-005

 

0 votes, average: 0.00 out of 50 votes, average: 0.00 out of 50 votes, average: 0.00 out of 50 votes, average: 0.00 out of 50 votes, average: 0.00 out of 5 (0 votes, average: 0.00 out of 5)
You need to be a registered member to rate this.Loading...

AR General Parameters

Accounts Receivable (AR) General Parameters

Overview

The General Parameters form is used for defining the A/R settings that are used throughout Govern. These include deposit management, subsystem priorities for A/R data, ACH parameters, and billing options.

To access the A/R General Parameters form:

  1. Launch GNA.
  2. Select Application Configurations > Accounts Receivable > A/R General Parameters.

Documentation

To see this information in pdf format, click on the following link:

103-ar-parm-General.pdf

 

Read More...

 

Action Buttons

Saving the General Parameters
Click Save (Ctrl + S) to save the Accounts / Receivable General Parameters settings to the SY_REGISTRY.
Cancel
If there are unsaved modifications, the Exit button changes to Cancel. When you click Cancel, the unsaved data are removed from the form.
Exit
Click Exit to close the form. A confirmation message is displayed if there are any unsaved modifications. Click Yes to save or No to close without saving.

Accounts Receivable General Parameters for All Subsystems

Minimum Balance to Compute Charges, or %
Enter the minimum balance, as an amount or percentage, on which late charges, including interest and penalties, can be applied.
Department Used from the Web
If you are using the Govern eGovernment application, this parameter is required. Select a default department for managing the A/R data from the web.
Bill Number Prefix
Select this option to use a two-digit prefix for A /R billing. If this option is selected, the Bill Prefix field is displayed on the Govern Tax Posting to A/R batch process.
Use Exact Installment
Select this option to prevent collection of the second installment of a bill before the first is collected. Otherwise, if the second installment is collected while the first remains outstanding, it is saved as the total payment in the database.
Security by Area
This option is not applicable to Govern v6.
The Security by Area parameter is valid for Govern for Windows only. For complete details on setting up security in Govern OpenForms, see Security for Govern OpenForms.
Bypass Funds Reapplication
The Bypass Funds Application is available for the following subsystems:

  • Land Management (LM)
  • Miscellaneous Billing (MB)
  • Special Assessment (SA)
  • Self-Reported Tax (ST)

You can select one or more options. Each is independent.
Select the option to save overpayments as Open Credit Transactions (OCT), on the applicable subsystem. Deselect the option to apply overpayments to another LM permit, MB invoice, SA project, or ST period, as applicable.
Use Proportional Distribution
Select this option to enable Proportional Distribution for cash collection. With Proportional Distribution, payments are distributed according to the amount owed on each account.
For example, in the following scenario, a taxpayer owes $150.00 for electricity and $50.00 for water, but pays a total of $100.00; i.e., 50% of the amount due. With proportional distribution 50% of each bill is paid; i.e., $75.00 is paid on the electric bill and $25.00 on the water bill.
Activate G/L Validation
Select Activate G/L Validation if you are using the Govern General Ledger (G/L) interface. G/L Validation ensures that the
G/L account types entered for the A/R Class Code are valid for the selected transaction type. When this option is selected, the valid G/L account type fields are enabled on the G/L Distribution Parameters form. See GL Distribution Parameters.
If you are not connected to a G/L interface database, the Account Type drop-down lists on the G/L Distribution Parameters form are populated from the AR_PARM_GL_ACCNT table.

NOTE: If this setting is enabled, you must set up a G/L distribution for all A/R Class Codes.
The following error message is displayed if you try to save an A/R Class Code without setting up G/L distribution.
A/R Class Codes without G/L distribution.
This error message is generated if you try to save A/R Class Codes from a previous year when this setting was deselected. The A/R Class Codes are saved by year. The General Parameters are not.

ACH (PAP) Supported via Payment Plan
Select this option if you want to accept ACH Pre-authorized Payment (PAP) for payments made through a payment plan. When this option is selected, the Payment Option is added to the Payment Plan Information section of the Payment Plan user form. When you set up a payment plan, you can select Manual, Payments by ACH (PAP), or postdated check.
If this option is not selected, the Payment Option is not added to the Payment Plan. For details, see Payment Plan.

Override G/L Entry Date by Posting Date
Select this option to override the entry date saved with the G/L transaction with the posting date.
Typically, the entry date is maintained in the General Ledger. However, for some clients, the posting date is more useful for files that are exported to another system or organization.
No SRT Discount if Not Full Payment
If you are using the self-reported tax module, select this option to apply the discount only when the full payment is received. Refer to the SRT documentation for further details.

ACH City and Bank Parameters

The ACH City and Bank Parameters are required for setting up ACH Processing. This is available for Utility Billing and all Tax Assessment and Billing subsystems. See ACH Payment Processing for details.

Related Subsystem Parameters

This section provides the A/R options for the subsystems. Is the subsystem linked by name or property? Is it set up by fiscal year? What is the minimum collection amount or percentage? For some subsystems, there is no option. For example, Bankruptcy is always linked by name. In these cases, the setting is disabled.

General Information for Related Subsystem Parameters

This section describes the parameters that are listed for most subsystems:
Link A/R to Names
Select this option to associate the A/R for the selected subsystem with he NA_ID. Other the A/R is associated with the P_ID.
If the A/R is linked by property, the user can perform a search by property or account number when accepting payments or performing an account inquiry. If the A/R is linked by name, the user can also search by name.
For some subsystems, this option is disabled. For example, it is disabled and always selected for Bankruptcy, Delinquency Collection, Personal Property, and the excise tax subsystems because the A/R for these subsystems is always linked by name. It is disabled and selected for Special Assessment because the A/R for this subsystem is always linked by property.
A/R Master by Fiscal Year
Select this option to save the A/R records for the selected subsystem by fiscal year.
For some subsystems, this option is disabled. It is always selected for the Tax and Assessment subsystems because they are saved by fiscal year. It is always deselected for Utility Billing because this subsystem is not saved by fiscal year.
Allow Payments < Late Charges Due
Select this option to accept payments that are less than the interest and penalties on the Payment Data Entry form in Govern.
Minimum Collection % or $
Enter the percentage or amount acceptable for minimum collection, if applicable.

For example: If you enter 50%, the minimum payment amount is 50% of the installment due. The user cannot enter less than the calculated amount on the Payment Data Entry form in Govern.

These parameters can be used instead of the Allow Payments < Late Charges Due option.

 

If the previous installment is not completely paid, the remaining amount is added to the current installment. This must be paid before any amount on the current installment can be collected.

For example, a $3,000. tax bill is divided into three installments of $1,000. each; the minimum collection amount is 50% ($500., in this example).

The client pays $800.00 on the first installment, leaving $200.00 remaining. This is added to the second installment.

The minimum amount that can be paid on the second installment is:
$200.00 (unpaid amount from first installment)
+500.00 (minimum collection amount for second installment).
$700.00

Aircraft Excise TaxSee Excise Tax Subsystems.

Bankruptcy

Link A/R to Names
This option is disabled and selected. The A/R for Bankruptcy is always linked by name.

A/R Master by Fiscal Year
Select this option if you want to save the A/R records for Bankruptcy by fiscal year.

Allow Payments < Late Charges Due
Select this option to allow the collection of payments that are less than the interest and penalties on the Payment Data Entry form in Govern.

Boat Excise Tax

See Excise Tax Subsystems.

Business License Subsystem

Select Business License under Related Subsystem Parameters to view or update the parameters for this subsystem.

Link A/R to Names
Business License records are always created by name. This option is selected and disabled for this subsystem.

A/R Master by Fiscal Year
This option is disabled and deselected.

Allow Payments < Late Charges Due
Select this option to allow the collection of payments that are less than the late charges due.

Deed Information Subsystem

Select Deed under Related Subsystem Parameters to view or update the parameters for this subsystem.

Link A/R to Names
By default, Accounts Receivable records are created by property for the Deed Information subsystem. Select this option to create records by name.

A/R Master by Fiscal Year
Select this option to save Deed Information AR records by fiscal year.

Allow Payments < Late Charges Due
Select this option to allow the collection of payments that are less than the interest and penalties on the Payment Data Entry form in Govern. Refer to the Mass Appraisal Sales and Comparable Sales documentation for more information.

Delinquency Collection

Link A/R to Names
This option is disabled and selected. The A/R for Delinquency Collection is always linked by name.

A/R Master by Fiscal Year
Select this option if you want to save the A/R records for Bankruptcy by fiscal year.

Allow Payments < Late Charges Due
Select this option to allow the collection of payments that are less than the interest and penalties on the Payment Data Entry form in Govern.

Land Management Subsystem

Select Land Management under Related Subsystem Parameters to view or update the parameters for this subsystem.

Link A/R to Names
By default, Accounts Receivable records are created by property for the Land Management subsystem. Select this option to create records by name. Records are defined, according to the type of name, selected on the Default Link Name parameter defined on the Land Management Parameters form; for example, the applicant for a permit record. Refer to the Permit & Inspections guide for details.
For the Permit to Name and License to Name functions, the Accounts Receivable records are automatically created by name.

A/R Master by Fiscal Year
Select this option to save Land Management A/R records by fiscal year.

Allow Payments < Late Charges Due
Select this option to allow the collection of payments that are less than the interest and penalties on the Payment Data Entry form in Govern.

Switch to Voluntary Payment when Payment without A/R
This option is applicable to the Payment Data Entry form in Govern. When a payment is on an account that has no active A/R, Voluntary Payment has to be selected as the transaction type.
When this option is deselected, an error message is displayed if another transaction type is selected.
When this option is selected, the transaction type for any payment on an account without Active A/R is automatically changed to the Voluntary Payment transaction type.

Miscellaneous Billing Subsystem

Select Miscellaneous Billing under Related Subsystem Parameters to view or update the A/R parameters for this subsystem.

Link A/R to Names
This option is disabled and always selected for the Miscellaneous Billing subsystem. Although you can link a property to a Miscellaneous Billing record, accounts are initially set up by name.

A/R Master by Fiscal Year
Select this option to save the miscellaneous billing records by fiscal year.

Web Default Class

Select a default AR Class for miscellaneous billing payments made over the Web. A miscellaneous billing is created for subscriptions to the eProfile that are paid over the Web. Refer to the eProfile guide for complete details.
Refer to the Miscellaneous Billing documentation for more information.

Motor Vehicle Excise Tax

See Excise Tax Subsystems.

Personal Property Taxation Subsystem

Link A/R to Names
Select this option to link the A/R to the Business or Occupant Name entered on the Personal Property Assessment Maintenance function.

A/R Master by Fiscal Year
This option is always selected for the Personal Property Tax module. A/R records for this module are saved by fiscal year.

A/R Master by Cycle Code
You are able to set up the Personal Property Tax subsystem by Cycles, similar to the Real Property Taxation. Select this option to use A/R Cycle Codes with the Personal Property Tax subsystem; such as, county, district and school (Table: VT_USR_ARCYCLE). Personal Property cycles are defined in the same table as Real Property Tax cycles.

When this option is selected, the Cycle field is enabled, for Personal Property on the following GNA forms:
A/R Class Parameters. See A/R Class.

Accounts Receivable Security. See A/R Security

Penalty / Int. Breakdown (Batch)
See Penalty / Int. Breakdown (Batch).

Allow Payments < Late Charges Due
Select this to accept payments that are less than the interest and penalties due on the Payment Data Entry form in Govern. This option can be used instead of the Minimum Collection % or Amount parameters.

Minimum Collection % or $
Enter the percentage or amount acceptable for minimum collection. These parameters can be used instead of the Allow Payments < Late Charges due option. Refer to the Personal Property Tax Assessment & Billing documentation for more information.

Real Property Sub-System

Link A/R to Names
Select this option to link the A/R to the Primary Name in the Real Property Mailing Index.

A/R Master by Fiscal Year
This option is always selected for the Real Property Tax module. A/R records for this module are saved by fiscal year.

A/R Master by Cycle Code
Cycle Codes are required for all Tax and Assessment subsystem in Govern OpenForms. Select this option to use A/R Cycle Codes with the Real Property Tax subsystem; such as, county, district and school (Table: VT_USR_ARCYCLE).

Allow Payments < Late Charges Due
Select this to accept payments that are less than the interest and penalties due on the Payment Data Entry form in Govern. This option can be used instead of the Minimum Collection % or Amount parameters.

Over, Short, and Duplicate Method
If this option is selected, duplicate and over-payments are automatically handled as follows:
The real property tax is paid, leaving a zero balance.
A negative or positive credit is generated for the difference.

Max Amount Over / Short $
Enter the maximums for applying this method to over and short payments. Typically, the method is used for small amounts and the maximums are for a few cents.

Penalty / Int. Breakdown (Batch)
This option is available for Real Property Tax, Personal Property Tax, and Utility Billing.
Select Penalty / Interest Breakdown (Batch) to use the Penalty / Interest Breakdown (Batch) process.
When this option is selected, the same A/R Class Code is used for the transaction, the penalty, and the interest. These are entered with interest (int) and/or penalty (pen) transaction types. For details, see A/R Class Code Process Map.
For example, the customer owes $50.00 for water billing and $50.00 for sewer billing. The penalty is 1% per month; normally, $1.00 is charged through the Penalty Type class code. However, using the Penalty / Interest Breakdown option, $0.50 is charged through a water class code and $.50 through a sewer class code.

When a transaction is made, it is automatically divided between the class codes. The penalties and interest are calculated according to the A/R Method selected. You do not need to create separate A/R Class Codes for this transaction type.
Deselect the Penalty and Interest Breakdown Batch option to send penalty and interest amounts to separate A/R Class Codes.

When this option is deselected, the Link to Interest A/R Class and Link to Penalty A/R Class fields are enabled on the A/R Class Parameters form, under the following conditions:
A/R Class Codes for Penalty or Interest Transaction Types exist for the sub-system.
An A/R Method is selected for the A/R Class Code.
You can link an A/R Class Code for penalty and a code for interest to the selected A/R Class Code. When a payment is received the penalty and interest amounts are automatically sent to the linked A/R Class Codes.
If an interest or penalty A/R Class Code is not specified, the first class code found for penalty or interest is used. See A/R Class Code Process Map

Minimum Collection % or $
Enter the percentage or amount that is acceptable for minimum collection. See Related Subsystem Parameters for conditions.

Collection Year
Enter the last year for which you are collecting bills. For example, if you enter 2014, users cannot accept payments on bills dated 2013 and before. Typically, this option is used by municipalities that transfer bills to the county, or to another level of government, after a set time has passed.

Self Reported Tax Subsystem

Link A/R to Names
All Self-Reported Tax records are created by name. This option is selected and disabled for this subsystem.
A/R Master by Fiscal Year
Select this option to save the AR records for the Self-Reported Tax subsystem, by fiscal year.
Refer to the Self Reported Tax guide for more information.

Special Assessment

Link A/R to Names
This option is disabled and deselected. The A/R for Special Assessment projects is always linked by property.

A/R Master by Fiscal Year
This option is disabled and deselected. Special Assessment projects are created for longer periods of time.

Allow Payments < Late Charges Due
Select this to accept payments that are less than the interest and penalties due on the Payment Data Entry form in Govern.

Transfer Principal Amount
Select this option in order to enable users to transfer the principal for Special Assessment projects.

Get A/R Class Interest by Project
Select this option if users need to separate interest according to betterment projects.

Default A/R Class Principal
An A/R Class Code for the principal generated from betterment projects is required. Select an A/R Class Code from the drop-down list.

Default A/R Class Interest
An A/R Class Code for the interest generated from betterment projects is required. Select an A/R Class Code for the drop-down list. You can select the same A/R Class for both principal and interest.

Utility Billing Subsystem

Link A/R to Names
Select this option to link the A/R for the Utility Billing subsystem to the Primary Name in the Utility Billing Mailing Index. Otherwise, the A/R is linked by property for this subsystem.
If you are using the Move In Move Out function, select this option to ensure that the moving in services are billed to the correct occupant.

A/R Master by Fiscal Year
This option is disabled and deselected. Utility Billing records are not saved by year.
Penalty / Int. Breakdown (Batch)
See Penalty / Int. Breakdown (Batch).
No Penalty on Penalty
Select this option to prevent charging a penalty on top of an existing penalty. This option is enabled only if the Penalty / Interest Breakdown option is selected. Refer to the Utility Billing guide for more information.
Excise Tax Subsystems
Select Aircraft or Boat Excise Tax under Related Subsystem Parameters to view or update the parameters for this subsystem.

For these subsystems, the Link A/R to Names and A/R Master by Fiscal Year options are disabled and selected. A/R records for these subsystems are always defined by name and saved by fiscal year.
Allow Payments < Late Charges Due
Select this to accept payments that are less than the interest and penalties due on the Payment Data Entry form in Govern. This option can be used instead of the Minimum Collection % or Amount parameters.
Minimum Collection % or $
Enter the percentage or amount acceptable for minimum collection.

Tax Title Parameters

There are three subsystems for tax title data:

  • Real Property Tax
  • Personal Property Tax
  • Land Management Tax

Link A/R to Names
The Link A/R to Names option for each tax title subsystem matches the Link A/R to Names setting for the corresponding subsystem. For example, if Link A/R to Names is selected for the Real Property subsystem, it is automatically selected for the Tax Title (Real Property) subsystem. If it is deselected for the Real Property subsystem it is automatically deselected for the Tax Title (Real Property) subsystem.
If these options are selected, the A/R is linked to the following:
Real Property Tax Title: links the A/R to the Primary Index in the Real Property Mailing Index
Personal Property Tax Title: links the A/R to the Business or Occupant Name entered on the Personal Property Assessment Maintenance function.
Land Management Tax Title: links the A/R to the default Link Name Type entered on the Land Management Parameters form.
A/R Master by Fiscal Year
This option is always selected for the Tax Title subsystems. A/R records are saved by fiscal year for tax title.
Minimum Collection % or $
Enter the percentage or amount acceptable for minimum collection for the tax title subsystems, if applicable. See Related Subsystem Parameters for conditions.
Refer to the Tax Title documentation for more information on these subsystems.

NOTE: A/R General Parameters are saved to (Table: SY_REGISTRY).

 

 

See Also

Accounts Receivable Module

 

 

103-ar-parm-General

 

0 votes, average: 0.00 out of 50 votes, average: 0.00 out of 50 votes, average: 0.00 out of 50 votes, average: 0.00 out of 50 votes, average: 0.00 out of 5 (0 votes, average: 0.00 out of 5)
You need to be a registered member to rate this.Loading...