eGov – Upgrade Web User Interface

Upgrade of the eGovernment – Public Self Service Portal

Overview

The Govern Public Web Portal is an e-Government services application that contains a set of modules which provide citizens and professionals public access via the Internet. Through the portal, users are able to apply, query, request and view information. This page is intended for administrators, and contains links to instructions of how to upgrade to the current version of the e-Government (eGov) – Public Self Service Portal (WebUserInterface) that is hosted on an IIS Server.

How to Obtain the Updated Package…

The new package can be downloaded through the Govern Deploy EZ deployment application. To download through Deploy EZ:

  1. Launch Deploy EZ.
  2. Select the Download binaries from the FTP site
  3. Click Next.
  4. In the Import Selection group, select the eGovern
    Package    .
  5. Click Next.

The selected packages will be downloaded.

Copy Downloaded Files to IIS Server

Once the package has been downloaded, copy the package (WEBUserINTERFACE_6.1.XXX.XXXX.zip) from the folder \\kpb\installpoint\MSGovern.SRTClient61\Binaries\eGovern to the IIS Server.

If downloaded to the Govern install folder:

\\Install_Folder\Govern\Binaries\WEBUSERINTERFACE\6.1.XXXX.XXXX

  1. Copy the downloaded file to the IIS server.
  2. Extract the Zip file package WEBUserINTERFACE_6.1.XXXX.zip

Deploying the new version on the IIS Server

WARNING: Prior to performing any update ensure that a backup has been made of the folder that is being upgraded.

1. Stop the Application Pool

To deploy the new version on the IIS server…

  1. Open the IIS Manager console.
  2. Select the Application Pools.
  3. Locate the application pool of the website that is to be updated.
  4. Click Stop to stop the application pool.

2. Stop the website to upgrade

In the Sites section:

  1. Select the website to upgrade and in the Manage Website
  2. Click Stop to stop the website.

3. Verify your backup…

In the folder containing the site that is being hosted, make a backup of all files in the folder. This should be done prior to copying the new version. This procedure is done in case there are errors with the installation and a roll back is required.

4. Edit the “web.config” file

Perform the following steps to edit the web.config file.

  1. Rename the config to web.config.bkp, or the filename that is located in the V1 folder; this is the folder that the website is installed in.
  2. Copy and Replace all files located in the files from the package.

<appSettings>

<!– MSGovern configuration file–>

<add key=”MSGovern.GovernNetConfig” value=”D:\inetpub\salestaxtest.kpb.us\v1\GovernNetConfig.xml” />

<add key=”MSGovern.SynchFileAndFolders” value=”FALSE” />

<add key=”MSGovern.CopyFilesAndFoldersLocally” value=”FALSE” />

<add key=”GovernSoftware.WebSite_Id” value=”1″ />

<add key=”GovernSoftware.DefaultPage” value=”WEBPROFILE” />

<add key=”GovernSoftware.UploadDirectory” value=”D:\inetpub\salestaxtest.kpb.us\vl\Dummy\”  />

<add key=”GovernSoftware.UploadMaxFileSize” value=”5048576″ />

<add key=”GovernSoftware.Version_dnet” value=”3″ />

<add key=”GovernSoftware.DisplayBuildVersion”  value=”Off” />

<add key=”GovernSoftware.TraceArTransactionResponse” value=”Off” />

<add key=”GovernSoftware.WebReportDirectoryPath” value=”D:\inetpub\salestaxtest.kpb.us\v1\Dummy\” />

<add key=”GovernSoftware.WebReportWidth” value=”875″ />

<add key=”GovernSoftware.WebReportViewerHeight” value=”1200″ />

<add key=”GovernSoftware.WebReportViewerZoomFactor” value=”100″ />

<add key=”GovernSoftware.WebReportViewerw1dthLandscape” value=”l080″ />

<add key=”GovernSoftware.WebReportViewerHeightLandscape” value=”825″ />

<add key=”GovernSoftware.WebReportV1ewerZoomFactorLandscape” value=”l00″ />

<add key=”GovernSoftware.ShowHelpPath” value=”False” />

<add key=”GovernSoftware.DebugMode value=”True” />

<add key=”GovernSoftware.ReportDebugMode” value=”False”  />

<!– Temporary Setup- Must add in GNA –>

<!– <add  key=”GovernSoftware.GisServerName” value=”mtldev01″/> –>

<!– <add  key=”GovernSoftware.GisGeoDataBaseName” value=”Layers@Juneau”/> –>

<!– <add  key=”GovernSoftware.AutoLogin.Login” value=”+5fJF+/cy3RmUG6brJBK9b5i/a+ycLok”/> –>

<!– <add  key=”GovernSoftware.Autologin.Password” value=”47rYbcSyyx6t 1Kx6ZnEn6QwFeKG4tNoq”/> –>

<add key=”GovernSoftware.cGovernWMUrl” value=”/st/account?suppressRedirect=true” />

</appSettings>
  • Open the config.bkp.
  1. Locate and copy the contents of the appSettings section to the new config file.

 

5. Restart the website…

The next step is to restart the website. In the IIS console…

  1. Open the Application Pools.
  2. In the Application Pool Tasks section, click Start to start the application pool of the site.
  3. In the IIS console open the Manage Website section and click Start to start the web site.
  1. At the bottom of the IIS Console, click the Content View tab at the bottom of the console to display the Content View in the console
  2. In the connections pane expand the sections to display the CommonPages
  3. Look in the CommonPages Content pane and locate aspx
  4. Click on aspx and select Browse under the Actions pane.

The default web browser will open to display the validator page; this will validate that the site is functional.

6. Validation of the installation

In the header of the validator page, the installed version of eGovern will be displayed. In addition, details of the website will also be displayed.

NOTE: The information in the Check Speed section can be ignored.

Documentation

Click here to view the content of this page as a document.

Related Topics

What’s New in the eGovern

Configuring the eGov

eGov Product Map

FAQ

 

 

201-all-egov-upgrade

 

0 votes, average: 0.00 out of 50 votes, average: 0.00 out of 50 votes, average: 0.00 out of 50 votes, average: 0.00 out of 50 votes, average: 0.00 out of 5 (0 votes, average: 0.00 out of 5)
You need to be a registered member to rate this.Loading...